{ "id": "tool-storage-rack", "sku": "tool-hanger-(x7hooks)", "title": "Tool Storage Rack", "slug": "tool-storage-rack", "price": 159, "currency": "EUR", "availability": "out_of_stock", "category": "garage", "category_label": "Garage Storage", "tags": [ "garage", "wall-mounted", "hooks", "heavy-duty", "adjustable" ], "colors": [], "materials": [ "Steel with a rust proof finish, rubber coated hooks" ], "dimensions": null, "weight": null, "images": [ "https://spacesaver.irish/product-images/garage/tool-storage-rack/main-tool-storage-rack.jpg", "https://spacesaver.irish/product-images/garage/tool-storage-rack/tool-storage-rack-2.jpg", "https://spacesaver.irish/product-images/garage/tool-storage-rack/tool-storage-rack-3.jpg", "https://spacesaver.irish/product-images/garage/tool-storage-rack/tool-storage-rack-4.jpg", "https://spacesaver.irish/product-images/garage/tool-storage-rack/tool-storage-rack-5.jpg", "https://spacesaver.irish/product-images/garage/tool-storage-rack/tool-storage-rack-6.jpg", "https://spacesaver.irish/product-images/garage/tool-storage-rack/tool-storage-rack-7.jpg" ], "description_short": "A wall mounted tool rack rated to 205 kg in total, with rubber coated hooks that slide along the rail and angle up at the tip so nothing slides off.", "description": "Why leaning does not work\n\nEvery garage has the same corner: spade, fork, rake, broom and a strimmer, all leaning against the wall, all slowly sliding.\n\nThey slide because a tool leaning at an angle is held up by friction alone, and friction on a smooth garage floor is not much. One gets knocked, it takes two with it, and the whole group ends up across the floor or against the car.\n\nHanging solves it completely, and it also gives back the floor space that the leaning pile was occupying.\n\nA rail beats individual hooks\n\nThe obvious alternative is screwing separate hooks to the wall, and it works right up until anything changes.\n\nFixed hooks lock in the spacing you chose on day one. Buy a wider tool, inherit a leaf blower, decide the shears should live next to the secateurs, and you are drilling fresh holes and leaving old ones.\n\nA rail with sliding hooks moves the decision to after the drilling. Get the rail level and secure, then arrange the hooks with the actual tools in your hands, which is the only way to get spacing right anyway. Change it in ten years' time in about a minute.\n\nMounting it: the part that matters\n\nThe rack is rated to 205 kg. That number is about the rack, and it means nothing if the wall or the fixings are the weak point.\n\nWork out what your wall is before buying fixings. Solid brick or block takes proper masonry anchors. A timber stud wall needs the fixings to land in the studs, not the plasterboard between them. Plasterboard alone, with only cavity anchors, is not a sensible host for a heavily loaded tool rack.\n\nHeight is worth a moment. Hold your longest tool against the wall and mark where the rail needs to be for it to hang clear of the floor. Then check that your heaviest tool can be lifted onto a hook at that height without a struggle. Those two constraints usually settle it between them.\n\nGet it level. A rail that slopes even slightly encourages everything to migrate to one end.\n\nLoading it sensibly\n\nThirty kilos a hook is generous, and the practical limits are usually shape rather than weight.\n\nSpread the heavy items along the rail instead of clustering them at one end. Hang the widest tools first and fill in around them, otherwise you end up with three narrow hand tools hogging the space the wheelbarrow needed.\n\nAnything that hangs by a small loop rather than a shaft, like a bag or a coil of hose, sits better nearer the middle where it will not swing into a neighbour.\n\nThe two details that stop things falling\n\nBoth are easy to miss on the product page and both matter daily.\n\nThe upward angle at the tip. A hung tool rocks when it is knocked or when something is taken off next to it. On a straight hook that rocking walks the handle outwards until it drops. On an upturned tip it walks back towards the rail.\n\nThe rubber coating. Steel handles on steel hooks slip, especially with a bit of oil or dust on them. Rubber grips. It also keeps the hook from marking painted and wooden shafts, which is the slow damage nobody notices until the handle is scarred.", "llm_summary": "Tool Storage Rack (SKU tool-hanger-(x7hooks)) is listed by SpaceSaver Ireland at spacesaver.irish for €159 EUR. This option is displayed for catalogue parity but is not currently available to buy. Standard delivery is 5 to 7 days within Ireland after order handling. Delivery is free when the discounted goods total is €75 or more; a €25 express option is also available. The product description, option and photographs are tied to the source listing captured on 25 September 2026.", "returnable": true, "return_policy": "Eligible online purchases can normally be cancelled within 14 days after delivery, followed by 14 days to return the goods. The store also accepts change-of-mind return requests made within 15 days of delivery. Consumer Rights Act 2022 and applicable Irish and EU rights are unaffected.", "shipping_profile": "standard", "warranty": null, "brand": "SpaceSaver Ireland", "gtin": null, "mpn": null, "condition": "new", "url": "https://spacesaver.irish/tool-storage-rack/", "canonical_url": "https://spacesaver.irish/tool-storage-rack/", "json_url": "https://spacesaver.irish/api/products/tool-storage-rack.json", "updated_at": "2026-09-25", "compare_at_price": 189 }